Achronix ACE Version 5.0 - Manual (Page 329)

draw polygon Chapter 5. Tcl Command Reference
[-fill] Optional The optional -fill option specifies
whether the oval should be filled
with color or not. If this option is
not used, the oval will be hollow.
draw polygon
draw polygon < points > [-layer < arg > ] [-id < arg > ] [-rgb < args > ] [-batch]
[-thickness < arg > ] [-fill]
This command allows you to draw a custom polygon on the GUIs layout view.
Argument Required/Optional Description
< points > Required The required <points>
argument specifies the list of x-y
coordinates for polygon, starting
with the x coordinate and
alternating. For example: 1 1 2 2
3 5 1 6.
[-layer < arg > ] Optional The optional -layer <layer>
option specifies the drawing
layer for the arc. If this option is
not used, the top layer (5) will be
used. Using a value of 0 will
draw on the background.
[-id < arg > ] Optional The optional -id <id> option
specifies a unique id for the arc.
If this option is not used, a
unique id will be automatically
generated and returned by the
command.
[-rgb < args > ] Optional The optional -rgb <rgb> option
specifies the rgb color value for
the polygon as a 3 element list of
integers red green blue. If this
option is not used, the color blue
will be used.
[-batch] Optional The optional -batch option
causes the GUI to not refresh
after this command. This is
useful when running many
draw commands in a row.
Afterwards, refresh drawing can
be called.
[-thickness < arg > ] Optional The optional -thickness
<
pixels> option specifies the arc
thickness in pixels. If this option
is not used, a thickness of 1 will
be used.
317 http://www.achronix.com UG001 Rev. 5.0 - 5th December 2012