Achronix ACE Version 5.0 - Manual (Page 76)

Editors Chapter 3. Concepts
Interlaken Rx Settings Page
This page configures the Interlaken Receive-side settings for the Interlaken wrapper.
Figure 3.35: Interlaken Rx Settings Page – Interlaken IP Configuration Editor
Interlaken Rx Settings Page Options
Option Description
RX Decommissioning Register
RX Has
Bad
Lane
RX Bad
Lane
RX Last
Lane
RX Meta Frame Length (hex) This input should be -1 the desired length. Thus for a Meta
Frame of 2048, a value of 2047 should be used. This input
is specified in terms of the number of words or cycles
minus one. For example, if set to 2047, then a Metaframe
sync word is sent every 2048 word transfers on every lane.
See section 5.4.3 of Interlaken spec 1.1.
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 64