Achronix ACE Version 5.0 - Manual (Page 369)

save placement Chapter 5. Tcl Command Reference
Argument Required/Optional Description
[-iofile < arg > ] Optional The optional -iofile <file>
option is used to specify the file
path to save the IO
pre-placement commands to. If
this option is not used, the file
will be saved to the active
project’s directory as
io preplacement.pdc
[-corefile < arg > ] Optional The optional -corefile <file>
option is used to specify the file
path to save the Core
pre-placement commands to. If
this option is not used, the file
will be saved to the active
project’s directory as
core preplacement.pdc
[-add] Optional The optional -add option is used
to specify whether the file
automatically added to the
active project or not.
[-output regions] Optional The optional -output regions
option is used to enable output
of region constraints into the
Core PDC file (or IO Ring PDC
file if -io only is used).
[-io only] Optional The optional -io only option is
used to specify whether only the
IO pre-placement file is output
or not.
[-core only] Optional The optional -core only option is
used to specify whether only the
Core pre-placement file is output
or not.
[-fixed only] Optional The optional -fixed only option
is used to specify whether only
the Fixed placement data is
output or not.
[-port names] Optional The optional -port names option
is used to specify whether port
names should be output for IO
Buffers instead of instance
names.
[-device port names] Optional The optional -device port names
option is used to specify
whether device port names
should be output for IO Buffers
instead of site names.
357 http://www.achronix.com UG001 Rev. 5.0 - 5th December 2012