Achronix ACE Version 5.0 - Manual (Page 382)

write bitstream Chapter 5. Tcl Command Reference
set units
set units
Set the default units for timing constraints.
timing summary
timing summary [-actual] [-best] [-all]
Print a summary of the timing results (of the last-computed timing report)
Argument Required/Optional Description
[-actual] Optional print ’Current Timing’ results, for actual
xp
[-best] Optional print ’Potential Timing’ results, with
xp-independent performance
[-all] Optional print all clocks instead of only the
meaningful ones
write bitstream
write bitstream [-outputfile < arg > ] [-debugdir < arg > ] [-reportsdir < arg > ]
[-flash] [-flash4x] [-hex] [-cpu] [-nocompress] [-compress] [-chainfile < arg > ]
[-aeskey < arg > ] [-monitor delay count < arg > ]
This command generates a programming bitstream for a fully placed and routed design in STAPL format.
Argument Required/Optional Description
[-outputfile < arg > ] Optional The optional -outputfile <file>
option may be used to specify an
output file name or file path. If
this option is not present, the
output is written to the default
implementation output
directory and is named
<
design name>.jam.
[-debugdir < arg > ] Optional The optional -debugdir <dir>
option is used to override the
default location for debug files
during this step.
[-reportsdir < arg > ] Optional The optional -reportsdir <dir>
option is used to override the
default location for report files
during this step.
[-flash] Optional The optional -flash option may
be used to output an additional
serial flash binary file format
output
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 370