Achronix ACE Version 5.0 - Manual (Page 328)

draw oval Chapter 5. Tcl Command Reference
draw oval
draw oval < x > < y > < width > < height > [-layer < arg > ] [-id < arg > ] [-rgb
< args > ] [-batch] [-thickness < arg > ] [-fill]
This command allows you to draw a custom oval on the GUIs layout view.
Argument Required/Optional Description
< x > Required The required <x> argument
specifies the upper-left x
coordinate for the oval.
< y > Required The required <y> argument
specifies the upper-left y
coordinate for the oval.
< width > Required The required <width>
argument specifies the width of
the oval.
< height > Required The required <height>
argument specifies the height of
the oval.
[-layer < arg > ] Optional The optional -layer <layer>
option specifies the drawing
layer for the oval. If this option
is not used, the top layer (5) will
be used. Using a value of 0 will
draw on the background.
[-id < arg > ] Optional The optional -id <id> option
specifies a unique id for the oval.
If this option is not used, a
unique id will be automatically
generated and returned by the
command.
[-rgb < args > ] Optional The optional -rgb <rgb> option
specifies the rgb color value for
the oval as a 3 element list of
integers red green blue. If this
option is not used, the color blue
will be used.
[-batch] Optional The optional -batch option
causes the GUI to not refresh
after this command. This is
useful when running many
draw commands in a row.
Afterwards, refresh drawing can
be called.
[-thickness < arg > ] Optional The optional -thickness
<
pixels> option specifies the
oval thickness in pixels. If this
option is not used, a thickness of
1 will be used.
UG001 Rev. 5.0 - 5th December 2012 http://www.achronix.com 316