Achronix ACE Version 5.0 - Manual (Page 125)

Editors Chapter 3. Concepts
Register Settings Page Options
Option Description
AHB Address Filter
Start Address Sets the starting address for filtering the registers displayed in ”AHB
Register Settings”. Settings must be a hexadecimal value.
End Address Sets the ending address for filtering the registers displayed in ”AHB
Register Settings”. Settings must be a hexadecimal value.
Function Filters the class of functions displayed in ”AHB Register Settings”.
AHB Register Settings
AHB Address This column displays the register address.
Override Value This column displays the register override value if set.
Value This column displays the current register value.
AHB Register Details
AHB Address Displays the address of the register selected in ”AHB Register Settings”.
Override Value Sets the register value for the register bits displayed under columns ”Bit”
through ”Description”. Settings must be a hexadecimal value.
Bit This column displays the register bit locations.
Register Name Displays the name for that bit location.
Value Displays the current bit value.
Block Displays the block assignment.
Function Displays the function the bit location belongs to.
Description Displays a description of the bit location.
Bit Description Displays a description of the bit location selected in the table. Identical to
the ”Description” column, but provides additional reading area for long
descriptions.
113 http://www.achronix.com UG001 Rev. 5.0 - 5th December 2012