BUCHI NIRWare - Manual (Page 111)

NIRWare 1.5 Software Manual Tutorial

105

Results generated with these applications are logged in the database. Depending on the
life cycle state, it will be possible to disable or delete the results but they can not be modified
afterwards.

With the use of life cycle model 'Electronic Records'/'Electronic Signatures', it will be
possible to use the electronic signature to sign results and reports.

To update the calibration or modify application parameters (e.g. SOP, sample name), a
copy of the application (version index increase) has to be made. This copy can be modified
and logged by setting it into the life cycle state 'approved' again.

Under Life Cycle state 'Electronic Records'/'Electronic Signatures' a finished
measurement sequence will be moved in the life cycle state 'checked'
5.7. Importing license protected applications
(e.g. BUCHI or Ingot Pre-Calibrated Applications)
BUCHI is offering various licence protected applications, i.e. BUCHI or INGOT Pre-Calibrated
Applications for Food & Feed. These applications come along as a file that can be imported using the
'Import general' functionality of the NIRWare Management Console. To make the application visible within
the Operator software, it must be licensed.
Thus, the licence request form has to be filled out. For this purpose, in the NIRWare Management
Console select Help > Software Registration... Fill out the required fields, and click on OK.
(Note: Article- and Serial Number (AN & SN) apply only for prepaid licences, and can then be found on a
sticker on the inside of your CD cover).