BUCHI NIRWare - Manual (Page 295)

NIRWare 1.5 Software Manual NIRWare Suite

289
Distance limit of the library Limit value defining the maximum allowed distance between a
given/measured spectrum and the most similar spectrum within the
library. The value depends on the method formula selected for
prediction and is defined in the library parameters.
Maximum distance into one
substance Describes the maximum difference between different measurements of
the same substance.
NOTE
The values might be different depending on the method formula selected.
6.7.6. Library Test
After the library was finished and validated, it can be tested, i.e. a spectrum from the database can be
predicted by means of the library.
For this purpose in the file tree on the left side of the NIRWare Management Console select Open, click
on the name of the library which you want to test, then select Library Test.
The following dialog opens: