BUCHI NIRWare - Manual (Page 143)

NIRWare 1.5 Software Manual NIRWare Suite

137
Create new template.
Activate selected template.
Save existing template.
Delete selected template.
Reset all user specific filter settings, excluding the templates.
Templates: Enter a new template name or search for existing templates from the drop down
menu.
Persist column widths and filter strings can be deactivated.
To create a new template, first configure the filter settings in the table. Then open the above
shown dialog. Under "Templates" enter a template name. Click on the "Create new
template" button.
6.2. Application Designer
6.2.1. Introduction Application Designer
The main function of the Application Designer is to provide an easy to use configuration tool to create
new or modify existing applications. The design of an application mainly defines how the end user
(operator) has to perform a specific analysis. It includes the definition of the required inputs, the
calibrations to be used with their properties, the SOP displayed in order to guide the operator, and finally
the requested batch entries and the definition of the report displayed.
To make the work with the Application Designer as easy as possible, the basic mode can be used where
only a few parameters need to be edited.