BUCHI NIRWare - Manual (Page 327)

NIRWare 1.5 Software Manual NIRWare Operator

321
The screen shot above is an example when the cover of the laser module was opened.

To reset the sensor of the laser click the Reset icon.

To reset the lifetime counter of the laser click the Start icon.
Device Configuration
The TCP/IP address of the instrument (NIRFlex N-500) can be changed from default (192.168.1.1) to any
other address.
In order to change the IP address of the instrument see: Change instruments TCP/IP address
Assembly Exchange Lamp & Assembly Exchange Laser
The lifetime counter of the laser and bott lamps (primary- and secondary lamp) can be seen and reset.
See: Resetting lifetime counter of lamp or laser