BUCHI NIRWare - Manual (Page 329)

NIRWare 1.5 Software Manual NIRWare Operator

323
NOTE
In order to change the static IP-address of the NIRFlex N-500 (e.g. to the local requirements of the IT) the
communication between PC and NIRFlex N-500 must be established. The user needs administrator rights
on the OS.
1. Select Device Configuration
2. Select the Host tab
Edit the new IP-Address of the spectrometer and click the OK button.
3. Select the Device tab
Edit the new IP-address of the spectrometer including the Subnet mask again and click
the OK button.
4. Confirm Security Message