BUCHI NIRWare - Manual (Page 172)

166

NIRWare Suite NIRWare 1.5 Software Manual
24 (default)
Successful suitability
test is required for
measurement A routine measurement can be started only if the SST was successful.

Checked = A routine measurement can be started only
with a successful SST. It is suggested to work with this
adjustment.

Unchecked = A routine measurement can be started
regardless of the SST result (default)
Save Spectra
Interferogram Next to the spectral information, the interferogram of each measurement
can be stored in the system. Activating this function will increase the use of
database space and the further use of the interferogram data is not yet
implemented.

Checked = save spectra interferogram is activated

Unchecked = save spectra interferogram is deactivated
(default)
Gain of ADC Detector
for samples This parameter is for information only.
The detector has 5 levels of sensitivity. Depending on the measurement cell
used, the optimal gain is used automatically.
Gain of ADC Detector
for references This parameter is for information only.
The detector has 5 levels of sensitivity. Depending on the measurement cell
used, the optimal gain is used automatically.
External Reference
Mode Mode to measure the external reference. Choose from the following
possibilities:

Interval or Temperature Drift = regularly or if the temp. changes

Manual = Manual reference measurement

Measurement Sequence = at each start of a measurement sequence

Once a day = once a day, before the first measurement

Interval = regularly (see interval value below)

Temperature Drift = after a certain temperature drift of the
interferometer
(see value below)

Batch = once after a new batch has been created

Disabled = No measurement for computing
Default:
1. NIRMaster Interval (60 min)
2. Fiber Optic SMA (for
continuous measurement) Manual (60 min)
3. CheckMaster Transmittance Measure Sequence
4. Solids Transmittance Measure Sequence
5. Fiber Optic Liquids Interval (60 min)
6. Fiber Optic Solids Interval (60 min)
7. Liquids Measure Sequence
8. Solids with Vial Add-On Measure Sequence