BUCHI NIRWare User Manual
Page 41
NIRWare 1.5 Software Manual
Tutorial
35
The selected frame will be magnified:
To change back to full view, click on the symbol with the magnification lens above the globus.
NOTE
In the Operator it is possible to delete spectra, but only right after they have been measured and if they
are not used for prediction with a calibration. This might be desirable if e.g. a vial was not correctly
positioned in the Autosampler. To delete a measurement, click the red cross button (red cross in the
upper left corner, not the one next to the magnification lens icon).
You can now select samples from the last measurement sequence for deletion.
To select (or deselect) a line in the list, press and hold the Ctrl-icon on your keyboard while left-clicking on
that line. Click on the red cross button to delete the selected measurements.