BUCHI NIRWare - Manual (Page 236)

230

NIRWare Suite NIRWare 1.5 Software Manual
You can now select the libraries to be copied into your new database. For this purpose activate the
checkbox in the first column of the corresponding line. If nearly all libraries should be copied, click Select
All and then deselect the ones you do not need.
The checkbox "Show latest versions only" will hide all older versions of a calibration.
Filters can be used to reduce the list to relevant entries...
To continue click the right double arrow button. A summary will appear, where you can review your
settings before the actual archiving process is started:
To start the archiving process, click the green checkmark button.
After the data transfer the new database becomes the active one and the old one is labelled as archive.
NOTE:
The names of archive and new database are automatically changed when the status is changing. The
new database inherits the name of the original database, while the archive is labelled as previously
specified by the user.
The old and new archives are interlinked by entries in their respective audit trails. Therefore it is always
clear where an archive is originated from, and what archive has been created from the current database.
Reaccessing an archive
Archives cannot be modified anymore but they can be accessed in read-only mode from the NIRWare
Management Console to view old measurements. For this purpose select Administrative Tools -
Database Maintenance - Archive Operations.