BUCHI NIRWare - Manual (Page 89)

NIRWare 1.5 Software Manual Tutorial

83
In this case, we rename it to ‘Lactose Quan’.
(Hint: With more complex projects it is also a good idea to start with an identical project name for the
calibration name and then just add a suffix for the respective property. Example: ‘Sugar mixture – lactose’
and ‘Sugar mixture – fine sucrose’.)
To save the calibration to the database, click on the ‘Save’ button in the menu bar .
Type in a name for your NIRCal project and click on the ‘Save As’ button:
So far the calibration is still in the ‘created’ state. If you would try to use it in an application, this would
prevent you from changing your application (!) into the next state, because an approved application
requires an approved calibration.
It is suggested to recalculate the first calibration. This is a master calibration, which organise the spectra
in the project and can never be put the approved LC state. Copy this calibration, open the copy (LC: Edit),
rename this: give a short name preferable with date at the end. Make a new calculation after renaming.
Put this calibration to "approved" state.