BUCHI NIRWare - Manual (Page 204)

198

NIRWare Suite NIRWare 1.5 Software Manual
Assign quantitative property information to samples
To assign quantitative property information to samples, select all samples you wish to edit (multi
selection). If necessary, narrow down the information displayed in the table, using appropriate filter
settings.
Open the selected samples by clicking on the "Open existing DataSet" button or with double click
on the last corresponding row indicator .
NOTE
Imported samples show no entries under 'Application'. Only samples measured collected with the current
database show the corresponding 'Application' information.
The following dialog opens in case the samples were recorded with an application to which no calibration
was assigned to (e.g. application for data acquisition to build up a calibration).
Here a property needs to be assigned to the samples first, before reference values can be entered.
The following dialog opens, if the samples were recorded with an routine application to which one ore
more calibrations are assigned to: