BUCHI NIRWare User Manual
Page 65
NIRWare 1.5 Software Manual
Tutorial
59
To ensure that all samples are measured under identical spectrometric conditions, we suggest to start the
development of the routine application with a copy of the application for acquisition of calibration data,
which is then adjusted.
Please keep in mind that only applications in the ‘approved’ Lifecycle state are visible to (and usable by) a
user of the ‘Operators’ user group.
These considerations are visualized in the following scheme:
The upper part of the scheme includes all steps regarding the calibration samples.
The middle part shows the processes for designing an application for routine use.
The last part indicates the routine use, which is the goal of the development process.
In the following, we will use the term ‘Operator user’ for a user account from the user group ‘Operators’,
and ‘Administrator’ for one belonging to the user group ‘Administrators’.
To log on as such a user, the correct user name and password are required for the corresponding dialog.
5.4.2. Creating an application for acquisition of calibration spectra
This first part of the tutorial guides you through the development process for a method that allows an
operator to collect spectra of calibration samples. These are required for calculation of a quantitative
chemometric calibration.