BUCHI NIRWare - Manual (Page 328)

322

NIRWare Operator NIRWare 1.5 Software Manual
Reports Calibration Parameter
Hardware parameters of the instruments can be seen, printed or exported, e.g. to pdf.
Click on to open the report view.
7.8.2. Changing the instruments TCP/IP address
Menu: NIRWare Operator / Advanced / Service / Device Configuration
Icon:
Every NIRFlex N-500 has the static IP-address 192.168.1.1 (Subnet 255.255.255.0) per default. It has
been delivered with a crossed Ethernet patch cable to communicate directly to an ethernet network card
on the PC where NIRWare is running.