BUCHI NIRWare - Manual (Page 42)

36

Tutorial NIRWare 1.5 Software Manual
After completion of the measurement of your reference samples, switch to the NIRWare Management
Console to continue with the next step in application development: the assignment of properties and
property values. In this case, it means to add the substance identity behind each spectrum.
5.3.4. Defining a property and a property value
After the spectra of the reference samples have been measured, the properties (here: identities) have to
be connected to the reference samples. This is done in the NIRWare Management Console (MC). The so
created data sets are later on the basis for building a calibration in NIRCal.
Switch to the MC, and select ‘Sample Management’ from the tree menu.