BUCHI NIRWare - Manual (Page 156)

150

NIRWare Suite NIRWare 1.5 Software Manual
Save the new property and change the position if necessary:
Example 1: Dry Matter
Add conditionality based on the residual:
if
( ApProperty [ "Moisture" ]. ResidualOK )
{
CalculatedValue = 100 - ApProperty [ "Moisture" ]. Value ;
}
If CalculatedValue is not defined in the formula the value will be set to a very high or low number which
one might want to avoid. In this case it is advised to define CalculatedValue to a value which the user will
interpret as not valid, e.g. -999.
In this example CalculatedValue is defined as -999 and only if the residual of the moisture is OK, is the
DM calculated.
CalculatedValue
= - 999 ;