BUCHI NIRWare User Manual
Page 58
Advertising
52
Tutorial
NIRWare 1.5 Software Manual
Next we change the ‘number of measurement sequences’ from 3 to 1.
From the tree menu, select the ‘Operator configuration’ menu of your application
Remember that the complete view as shown above is only visible if the icon ‘show advanced settings’
was activated.
Again, first change to ‘edit’ mode. Then change the number of measurement sequences to ‘1’. Also type
in an appropriate Standard Operation Procedure (SOP) description:
Save this dataset by clicking on the save icon
again.
The application for routine use has been prepared, and the calibration can now be assigned to it.
Advertising