BUCHI NIRWare - Manual (Page 15)

NIRWare 1.5 Software Manual General work flow

9
3. General work flow
In the development of a routine application, different software modules are used. The application
development cycle is summarized below:
1. Develop an application with NIRWare Application Designer
2. Measure the calibration samples with NIRWare Operator
3. Assign reference values to each sample with NIRWare Sample Manager
4. Analyze spectral data and develop a calibration with NIRCal 5
5. Assign the calibration to the application with NIRWare Application Designer
6. Measure and predict measured samples in routine use with NIRWare Operator