BUCHI NIRWare - Manual (Page 140)

134

NIRWare Suite NIRWare 1.5 Software Manual
To move a Snap In from one side to the other, click it so that it is highlighted and press the corresponding
arrow button. Then click save button to confirm your settings.
NOTE
Generally all entries within the Module windows of the Management Console have to be saved by means
of the Save icon. When new settings in an active window have not been saved, yet, this can be seen from
an asterisk next to the window header.
6.1.2. Filter
In the tables of Application Designer, Sample Management and Administrative Tools and Security
Designer, three different filter functions are provided to determine which applications, samples, reports,
etc. should be displayed.
The filter row is always placed directly under the columns header row.
Time related filter
The time related filter enables to determine the time interval the data to be displayed have been
generated.
Two different default settings are possible:
By default, only the data from the present day will be displayed.
All entries will be displayed. A right mouse click on the filter cell will reset
the filter to "show all entries".
Left mouse click on the filter cell opens the following dialog: