BUCHI NIRWare - Manual (Page 332)

326

NIRWare Operator NIRWare 1.5 Software Manual
As instrument covers must be opened to replace the lamp or the laser, the sensors of the cover need to
be reset in the Service module as well be means of Assembly Setup. See
Running an instrument setup
Click the icon Reset primary lamp counter to set it to 0 hours.
Confirm the following security message by clicking OK.
7.8.5. Running an instrument setup
During the initialization process, the instrument recognizes when a cover was opened and the following
message appears.
Click the green check mark button to confirm the message.
To run the instrument setup click the Service Icon on the top of NIRWare Operator screen.
Double click Assemblies, the following window appears.