BUCHI NIRWare - Manual (Page 219)

NIRWare 1.5 Software Manual NIRWare Suite

213
The complete SST test contains out of four test categories. From the drop down list select the part of the
SST test that should be displayed in the selection window:

SST Complete (all test results will be displayed)

SST Wavenumber Accuracy (results from wavenumber test will be displayed)

SST Noise (results from noise test will be displayed)

SST Linearity (Linearity test results will be displayed)

SST Temperature (Temperature test results will be displayed)
The reports list contains the following columns according to which it can be filtered:
Type Type of selected SST test result
TimeStamp Date and time
Info additional test information such as reason for "not passed result"
Success SST passed (no check mark = not passed; check mark = passed results)
Aborted SST test aborted (no check mark = not aborted; check mark = aborted tests)
Instrument Instrument type
MeasureCell cell type
To define the content of the report, you can show or hide test details:
"Details" checked: detailed results will be shown in report
"Details" not checked: only result overview will be shown in report
To open a SST report, proceed as follows:
Click the arrow under Choose an SST type. A drop-down menu opens.
1. Select whether you want to see just one specific test of the SST or the complete SST by
clicking on it. The corresponding selection is displayed in the table below.
2. You can now use filters to specify the table content or reset your filter settings listed in the
area below the table by clicking the corresponding button.
3. Under Report Options you can specify whether the report(s) should be displayed with
details () or not by checking the corresponding checkbox.
4. To select one or several reports from the list, click the corresponding row(s), to select all
reports listed in the table above, click Select All.
5. To open the selected reports click the icon or select Edit > Open. The report is now
generated. It appears as additional link in the file tree on the left and is displayed in the
window on the right.