BUCHI NIRWare - Manual (Page 177)

NIRWare 1.5 Software Manual NIRWare Suite

171
Show the serial number Instrument and measurement cell serial number will be shown in report
header.

Checked = Instrument and measurement cell serial number
shown in report (default)

Unchecked = Instrument and measurement cell serial
number not shown in report
* non bold parameters are advanced parameters.
NOTE:
In case a batch report is selected, make sure that the following parameters are set in the application
under Operator Configuration:

Automatic printout of measurement results: DISABLED

Number of repetition measurements in case of an out of specification (OoS): 0
6.2.12. Operator configuration parameters
Parameter Name Description
SOP Text An SOP text can be generated, which is displayed in the Operator Modules
SOP-window
Value: "Text"
Automatic printout of
measurement results The measurement results are automatically printed out on the default
printer if this function is checked.
Continue in error case
allowed "Checked": If a sample result is not ok, a process continuation without
repeating the measurement of this sample is possible (this function is only