BUCHI NIRWare - Manual (Page 178)

172

NIRWare Suite NIRWare 1.5 Software Manual
useful in combinati on with “Number of repetition…” is greater than zero)
"Unchecked": No continuation possible
Number of repetition
measurements in case
of an Out of
Specification (OoS) "0": If a sample result is not ok, no repetition is requested.
"1…N": Repetition possible.
Number of
measurement
sequences "1…N": A sequence is the max. number of possible measurements without
changing the samples: e.g. Fiber Optics => 1 sample, Solids and Liquids
=> 6 samples. The number of measurement sequences defines the N-fold
measurement of the appropriate sequence
Suggestion:
- 3 for spectra collection,
- 1 for identification;
- 3 for quantitative determination
Use drop down for
expected substance Only ID-testing.
"Unchecked: The expected substance name must be selected from a drop
down list.
"Checked": The expected substance code must be entered by keyboard or
barcode (expected substance ID)
Sample Plan Only for measuring cells having more, than one sample (Liquid, Solid with
Vials or Tablet add-on).
Enter sample positions and/or position ranges separated by commas.
Autonaming will be applied to the selected positions or to all positions if no
selection is entered.
Example: 1, 3, 5-8
Auto name Part 1 "Drop down list": Nearly every field from the “Sample Description Field” list
can be selected. It is suggested to use this adjustment.
Auto name Part 2 "Drop down list": Nearly every field from the “Sample Description Field” list
can be selected. It is suggested to use this adjustment.
Auto name Part 3
Note: Allows automatic
definition of the sample
names. Each
combination of all
possibilities from the 3
parts are allowed.
"Counter": Defines a counter for all samples belonging to a batch
"Date": Corresponds to the date of the first measurement
"Blank": Leaves third part blank
Same sample name
allowed Checks current input of sample names for double names.
"Double names are not allowed": Double names are prohibited
"Check for double names": Only a warning message is displayed
"No check": No action defined.
Show number of
samples left "Checked": Displays the number of samples left before each actual sample
measurement. Especially important for ID if the Number of Container is
activated.
"Unchecked": not displayed
Error confirmation text "Checked": In case of not-ok-measurement, a comment must be entered.