BUCHI NIRWare - Manual (Page 326)

320

NIRWare Operator NIRWare 1.5 Software Manual
The Service module is intended mostly for a service engineer to see
and change instrument parameters.
The default setup only allows the User "Service" with the
corresponding password access these advanced functions of the
service module. Users other than "Service" have restricted access to
the Service module in order to do the following maintenance work on
the system:

Assembly Setup to reset sensors when the
covers were opened

Device Configuration to change the IP
address of the NIRFlex N-500

Assembly Exchange Lamp to reset the
lifetime counter of the lamps

Assembly Exchange Laser to reset the
lifetime counter of the laser

Reports Calibration Parameter to view or
print instrument parameter settings
Assembly Setup
Assembly List of assemblies with their description
Article Order No. of an assembly
State State of an assembly
Access Access indicates whether the current user has the right to access a specific assembly.
Start an assembly
Reset an assembly