BUCHI NIRWare - Manual (Page 284)

278

NIRWare Suite NIRWare 1.5 Software Manual
6.7. Library Designer
6.7.1. Introduction Library Designer
For identity control in the warehouse it is not always necessary to work with chemometric calibration
methods such as Cluster or SIMCA. When sample identification is needed, often a comparison of spectra
leads to good and reliable results, is much easier to handle and requires only little reference analysis.
The NIRWare Library Designer serves to create and administrate spectra libraries for spectra comparison.
All spectra within the NIRWare database can be used to define spectra libraries.
To carry out the spectra comparison of measured spectra and spectra within the library, 13 different
algorithms are available.
Each library can be validated internally or externally with a test spectra set.
To use the Library Designer, a valid license is neccessary. This license is part of the Advanced License
Package for NIRWare or can be purchased separately.
To use the Library Designer, the Snap-in has to be added to the ' NIRWare Management Console '.
To open the Library Designer proceed as follows:
In the file tree on the left side of the NIRWare Management Console select Library Designer. The
following dialog opens: