BUCHI NIRWare - Manual (Page 92)

86

Tutorial NIRWare 1.5 Software Manual
Click on the ‘Copy’ icon to create a copy of this application:
This copy starts in the ‘created’ state, while the original application remains ‘approved’:
To change the name, you first have to click on the ‘Edit’ icon .
This causes a change from ‘Idle’- to ‘Edit’ mode, allowing you now to make changes to the ‘Value’-fields.
Change the application name, then save .
The application for routine use has been prepared, and the calibration can now be assigned to it.