BUCHI NIRWare User Manual
Page 118
112
Tutorial
NIRWare 1.5 Software Manual
NOTE
Applications which are not saved in the Management Console remain in the Life Cycle state
'....Editing'. Applications in this state will not be shown in the selection window.
The user selects the row for the desired application, then clicks the green check mark at
the bottom right corner of the “Select Application” window. The windows appearance
changes as shown below (particular fields and their labels may vary, depending on how your
Application has been configured).
If this batch (or lot) has already been entered in a past measurement, the user now
proceeds to the selection of the batch that he is running. If this batch (or lot) is being
measured now for the first time on the N-
500, the user clicks on the “New” near the center of
the screen, next to the empty “Batch” field. The “New Batch” window opens as shown below.