BUCHI NIRWare - Manual (Page 86)

80

Tutorial NIRWare 1.5 Software Manual
Select ‘quantification’ as calibration type, and click on ‘OK’. The wizard now starts with the optimization
process, which will take a few minutes. The progress is visualized in the ‘Calibration Q-Value overview’:
In the course of the optimization process, you see the Q-Value rise from zero (no working calibration) up
close to 1 (=perfect calibration).
After the wizard is finished, the results are shown in a list where the best calibrations (with the highest Q-
values) are found on top of the list: