BUCHI NIRWare - Manual (Page 206)

200

NIRWare Suite NIRWare 1.5 Software Manual
The property is now added to the samples and reference values can be entered. The reference values for
each sample can be entered manually or with copy/paste (Ctrl + C / Ctrl + V) from Windows Excel or other
office programs.
After all entries are made, click on to save changes to the database.
With two exceptions, properties can also be removed from samples.
To remove a property, select the corresponding entry in "Other Assigned Properties" and click
on . The entered reference values will be lost.
In case the sample is used in a calibration the property and the reference values can not be deleted. The
following message appears:
Only properties added to the sample manually can be removed. Properties related to the routine
application can not be removed.
The colour of the row indicator shows the type of property:
Property from routine application. This property will be assigned automatically to samples
measured with a routine application. These properties can not be removed from samples.