BUCHI NIRWare - Manual (Page 229)

NIRWare 1.5 Software Manual NIRWare Suite

223
Database Connection
In the fields Database Server the path of the database server running the database which the software
package accesses is indicated. The field Database Name shows the name of the corresponding
database.
Language and Culture
NIRWare Management Console and NIRWare Operator are multi-language capable. In order to switch to
a different language a language package needs to be installed additionally. From the drop-down menu
select the language in which the software should be displayed. In case the localization for your selected
language is not applicable yet, English will be used as default language.
Press the Save button to save the modification.
Persistent Grid Config
When you have established some user dependent filter settings for the table content in the Application
Designer, the Sample Management or the Administrative Tools, you are able to reset these settings here
by clicking Reset. Otherwise your filter settings will be applied again each time you log in with your user
name and password again.
Press the Save button to save the modification.
Default Printer Settings
Here the printer settings for the used printer are indicated. To setup these settings, click the Setup...
button. The Paper Setup dialog opens, where you can define the paper size and source, the orientation,
the margins and the used printer. To get back to the default printer configuration of your operating system,
click the Reset button.
6.4.5. Database Maintenance
Database Maintenance
The Database Maintenance dialog gives an overview of the database properties. To open it, select in the
file tree on the left side of the NIRWare Management Console the entry Administrative Tools -
Database Maintenance.
The following dialog opens: