BUCHI NIRWare - Manual (Page 169)

NIRWare 1.5 Software Manual NIRWare Suite

163
The following list of parameters is available:
Parameter Name Description
Instrument Type of NIR Instrument to be implemented in this specific application:
NIRFlex N500
Measurement Cell Selected measurement cell:
1. NIRMaster
2. Fiber Optic SMA (for continuous measurement)
3. CheckMaster Transmittance
4. Solids Transmittance
5. Fiber Optic Liquids
6. Fiber Optic Solids
7. Liquids
8. Solids
Measurement Cell
Add-On Selected measurement cell add-on. The dialog offers different choices
depending on the selected measurement cell type:
1. No Option
2. No Option
3. No Option
4. 10 Samples
30 Samples
USP Testkit for Solid Transmittance (only for BUCHI internal use)
Reference Samples (only for BUCHI internal use)
5. No Option
6. No Option
Transflection Head
7. No Option (Cuvette)
8. Vial
Petri
USP Testkit (only for BUCHI internal use)
Tablet
XL
Instrument Serial-
Number Enter the serial number of the instrument to be used only with this
application.
Without restriction the application can be used with any instrument.
Example: 0500000003.
Number of Scans Entry for the number of scans per measurement.
Depending on the used measurement cell, used add-on and application
type (Quantification, Identification), different default values are set as
default:
1. NIRMaster 8 scans (Qualitative)
32 scans (Quantitative)
2. Fiber Optic SMA (for
continuous measurement) 8 scans (Qualitative)
32 scans (Quantitative)
3. CheckMaster Transmittance 64 scans
4. Solids Transmittance 64 scans