BUCHI NIRWare User Manual

Page 71

Advertising

NIRWare 1.5 Software Manual

Tutorial



NOTE

For ‘real’ applications, use ‘speaking’ names that precisely identify each sample just from the name! Also
think of using the autoname functions described in the NIRWare documentation.

If you have filled in and checked all information, prepare the samples for measurement (i.e. place all vials
in the autosampler) and press the green check mark button.

During the measurement sequence, the SOP text field is greyed out.

If an ‘Instrument Suitability Test’ (SST) starts, just wait until that is finished. Then the instrument will start
with the measurement sequence. This includes periodic measurement of internal and external references.
In our example with the vial autosampler option, these measurements are automatized. (With other
options, the software will give a description of what to do.)

First, the external reference is being measured:

Then the samples are being measured. All spectra are displayed in one window:

Advertising