BUCHI NIRWare User Manual
Page 54
48
Tutorial
NIRWare 1.5 Software Manual
Click on the ‘R’ icon on your keyboard to start (and stop) the autorotation function.
The plot confirms that the calibration from the wizard is well capable to differentiate between all four sugar
types.
(Comment: For more complex examples, the same rule for overlap checking applies to 3D- as for 2D-
projections: Look at every overlap from different perspectives.)
Now switch again to the NIRCal Explorer window and have a look at the ‘Calibrations’
Note that the ten best calibrations are stored here. The one with the highest Q-value is set to active
(indicated by a red dot).
Since we only need one calibration, we select everything except for the one we want to keep. This is done
by holding down the Ctrl-Key while clicking in the list on the calibration to be selected. Then right-click on
the selection and c
hoose ‘delete’. A confirmation message appears, which you will answer with YES.