BUCHI NIRWare User Manual
Page 36
30
Tutorial
NIRWare 1.5 Software Manual
Type in the name of your batch, then click on the green check mark button.
Then type in the information for AnalysisID and Sample names.
Note: For ‘real’ applications, use ‘speaking’ names that precisely identify each sample just from the name.
Also think of using the autoname functions described in the NIRWare documentation.
If you have filled in and checked all information, prepare the samples for measurement (i.e. place all vials
in the Autosampler) and press the green arrow button.
During the measurement sequence, the SOP text field is greyed out.
If an ‘Instrument Suitability Test’ (SST) starts, just wait until it is finished. Then the instrument will start
with the measurement sequence. This includes periodic measurement of internal and external references.
In our example with the vial Autosampler option, these measurements are automatized. With other
options, the software will give a description of what to do.