BUCHI NIRWare - Manual (Page 85)

NIRWare 1.5 Software Manual Tutorial

79
Click on YES to let the C/V-selection wizard create a selection.
Note: It is highly recommended to perform the selection sample wise, so that ALL spectra of one
individual sample are EITHER in the C- OR V-Set. This is described in detail in the NIRCal
documentation.
A full calculation is performed, and the result visualized in seven windows.
Notice that in the ‘Predicted property vs. original property’ window a diagonal calibration curve is shown
for the Property Lactose.
This is a good check for successful deselection of the unwanted property, because it confirms that the
actual calibration has only been calculated with regard to Lactose.
Optimization of the calibration is not a topic here, so we leave this job to the patented NIRCal Calibration
Wizard: from the menu, select Wizard/Calibration Wizard. A dialog appears for definition of general
parameters: