Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 111)

-111-
<1-5>
retry-count <1-5>
Default:
2
Usage Guide:
To configure PD Ping Alive Check retry count of PoE for specific interface.
Example:
To configure PD Ping Alive Check retry count (5) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe pdcheck retry-count 5
4.2.48.75 poe power limit
Command:
poe power limit { <Power in watts>}
poe
Power Over Ethernet.
power
Setting maximum power for port in allocation mode.
limit
The maximum power.
<Power in watts : option>
Maximum power for the interface (0-15.4 Watt for PoE
standard mode, 0-30.0 Watt for PoE plus mode)
Default:
2
Usage Guide:
To configure maximum power of PoE for specific interface.
Example:
To configure maximum power (29 watts) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe power limit 29
4.2.48.76 poe priority
Command: