Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 250)

-250-
Example:
To enable the Port Security
Switch# configure terminal
Switch (config)# port-security
4.2.147 port-security aging
Command:
port-security aging
port-security
Enable/disable port security globally
aging
Enable/d isable port security aging
Default:
Disabled
Usage Guide:
To enable the Port Aging
Example:
To enable the Port Aging
Switch# configure terminal
Switch (config)# port-security port-security aging
4.2.148 port-security aging time
Command:
port-security aging time <10-10000000>
port-security
Enable/disable port security globally
aging
Enable/d isable port security aging
time
Time in seconds between check for activity on learned MAC addresses
<10-10000000>
seconds
Default: