Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 243)

-243-
supply
Use poe supply to specify the maximum power the power supply can deliver.
<1-XXX>
Maximum power the power supply can deliver.
Default:
Maximum
Usage Guide:
To configure Power Supply Budget.
Example:
To configure Power Supply Budget (200 watts).
Switch# configure terminal
Switch (config)# poe supply 200
4.2.142 poe temperature-protection enable
Command:
poe temperature-protection enable
poe
Power Over Ethernet
temperature-protection
Configure PoE over temperature protection to enable or disable.
enable
poe temperature-protection enable
Default:
Enabled
Usage Guide:
To enable PoE Temperature Protection.
Example:
To enable PoE Temperature Protection.
Switch# configure terminal
Switch (config)# poe temperature-protection enable
4.2.143 poe temperature-threshold
Command: