Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 198)

-198-
mld
Multicast Listener Discovery
snooping
Sno oping MLD
Default:
Disabled
Usage Guide:
To enable MLD Snooping.
Example:
To enable MLD Snooping.
Switch# configure terminal
Switch (config)# ipv6 mld snooping
4.2.81 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan <vlan_list>
ipv6 IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
vlan
MLD VLAN
<vlan_list>
VLAN identifier(s): VID
Default:
Disabled
Usage Guide:
To enable MLD Snooping for specific VLAN.
Example:
To enable MLD Snooping for VLAN 1.
Switch# configure terminal
Switch (config)# ipv6 mld snooping vlan 1
4.2.82 ipv6 mld ssm-range