Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 291)

-291-
Switch# configure terminal
Switch (config)# transport email smtp-server mail.interlogix.com.tw port 123
4.2.183 transport email to
Command:
transport email to <1 | 2> <mail_addr>
transport
Enable or disable transport email function.
email
Enable or disable transport email function.
to
receiver's email
<1|2>
1: mail address 1 2: mail address 2
<mail_addr>
mail address
Default:
N/A
Usage Guide:
To configure SMTP destination mail address.
Example:
To configure SMTP destination mail address 1 ([email protected]).
Switch# configure terminal
Switch (config)# transport email to 1 [email protected]
4.2.184 upnp
Command:
upnp
upnp
Set UPnP's configurations
Default:
Disabled