Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 279)

-279-
<v_word10_to_32> ] [ <securtyname> ] }
version
Set SNMP trap version
v1
SNMP trap version 1
<V1Comm : word127>
SNMP trap community
v2
SNMP trap version 2
<V2comm : word127>
SNMP trap community
v3
SNMP trap version 3
<Securtyname : word32>
seucrity name
engineID
Configure trap server's engine ID
probe
Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure Version of SNMP
Example:
To configure Version (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host interlogix
Switch (config-snmps-host)# version v2 interlogix
4.2.176 spanning-tree aggregation
Command:
spanning-tree aggregation
spanning-tree Spanning Tree protocol
aggregation Aggregation mode
Default:
None
Usage Guide: