43 show ip verify source – Interlogix NS3702-24P-4S Command Line Guide User Manual
Page 350
![background image](/manuals/679209/350/background.png)
-350-
IPv4 ICMP statistics:
Rcvd: 2618 Messages, 0 Error
Sent: 2618 Messages, 0 Error
ICMP message statistics:
IPv4 ICMP Message: Echo Reply
Rcvd: 0 Packet
Sent: 2618 Packets
IPv4 ICMP Message: Echo
Rcvd: 2618 Packets
Sent: 0 Packet
4.20.43 show ip verify source
Command:
show ip verify source [ interface ( <port_type> [ <port_type_list> ] ) ]
show
Show running system information
ip
Internet Protocol
verify
verify command
source
verify source
interface
ip verify source interface config
Default:
N/A
Usage Guide:
To display the IP Source Guard configuration.
Example:
To display the IP Source Guard configuration for GigabitEthernet 1/1.
Switch # show ip verify source interface GigabitEthernet 1/1
Port Port
Mode Dynamic Entry Limit
---- --------- ---------------
----
GigabitEthernet 1/1 enabled 1