Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 312)

-312-
4.16 no
4.16.1 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (erps 1 command force port0)
Switch# no erps 1 command force port0
4.17 ping
4.17.1 ping ip
Command:
ping ip <v_ip_addr> [ repeat <count> ] [ size <size> ] [ interval <seconds> ]
ping
Send ICMP echo messages
ip
IP (ICMP) echo
<v_ip_addr>
ICMP destination address
interval
Specify repeat interval
<Seconds : 0-30>
0-30; Default is 0
repeat
Specify repeat count
<Count : 1-60>
1-60; Default is 5
size
Specify datagram size