Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 403)

-403-
4.21 terminal
4.21.1 terminal editing
Command:
terminal editing
terminal
Set terminal line parameters
editing
Enable command line editing
Default:
Enabled
Usage Guide:
To enable editing mode for current terminal session.
Example:
To enable editing mode for current terminal session.
Switch # terminal editing
4.21.2 terminal exec-timeout
Command:
terminal exec-timeout <min> [ <sec> ]
terminal
Set terminal line parameters
exec-timeout
Set the EXEC timeout
<min>
Timeout in minutes
<sec>
Timeout in seconds
Default:
N/A
Usage Guide:
To configure idle timeout of EXEC mode for current terminal session.
Example:
To configure idle timeout with 500 minutes of EXEC mode for current terminal session.