Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 191)

-191-
To enable IP Source Guard
Switch# configure terminal
Switch (config)# ip verify source
4.2.75 ip verify source translate
Command:
ip verify source translate
ip Internet Protocol
verify
verify command
source
ver ify source
translate
ip verify source translate all entries
Default:
Disabled
Usage Guide:
To translate dynamic entries to IP Source Guard table
Example:
To translate dynamic entries to IP Source Guard table
Switch# configure terminal
Switch (config)# ip verify source translate
4.2.76 ipmc profile
Command:
ipmc profile
ipmc IPv4/IPv6 multicast configuration
profile
IPMC profile configuration
Default:
Disabled