Interlogix NS3702-24P-4S Command Line Guide - Manual (Page 72)

-72-
N/A
Usage Guide:
To configure switch’s hostname.
Example:
To configure switch’s hostname with “nsswitch”
Switch# configure terminal
Switch (config)# hostname nsswitch
nsswitch(config)#
4.2.48 interface * | GigabitEthernet
Command:
interface * | GigabitEthernet <port_type_list>
* All switches or All ports
GigabitEthernet
1 Gigabit Ethernet Port
Default:
N/A
Usage Guide:
To enter the interface mode.
Example:
To enter the interface 10GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# interface GigabitEthernet 1/2
Switch (config-if) #
4.2.48.1 access-list action permit
Command:
access-list action permit
action
Access list action
Default: